RC IMPREG 400® 5Kg
In Stock
The description
RC Impreg 400® is a ready-to-use, colorless and water-based water repellent for porous substrates
(concrete, bricks, cement plaster, natural stone, tiles, etc.).
The RC Impreg 400® is based on a blend of different polymers of increasing molecular weight offering
an optimal and lasting water-repellent effect.
RC Impreg 400® is solvent-free, flammable, odorless and can be applied to wet, dry or alkaline substrates,
even fresh joints.
Description
Characteristics
RC Impreg 400® is a micro-emulsion penetrating easily porous substrates and containing alkoxylated oligomers, it can also be used on very alkaline materials such as fresh joints, plaster, fresh concrete … The products penetrate very well and resist UV from the sun.
- Protects against heavy rain and inclement weather
- Reduces water absorption
- Does not form a film and does not change the appearance of the substrate
- Allows the substrate to breathe (permeable to water vapor)
- Slows mold formation
- Reduces frost damage
- Limits the formation of efflorescence
- Prevents premature spots
- Solvent-free, non-toxic, colorless, flammable
- Excellent aging, does not turn yellow
- Can be applied on wet or dry substrates (also fresh joints)
- Waterproofing according to the Karsten tube test (100% after the accelerated aging test)
Area
The substrate surface must be clean and free of dust and mold.
Optionally treat the substrate with fungicides before applying RC-Impreg 400®.
Old cracks, bad joints must be repaired before application and the use of stone hardener may be necessary.
In this case, it is recommended to wait 3 weeks before using the RC-Impreg 400®.
Application The treatment must prefer to be carried out by wetting the substrate at low pressure, with a roller or brush and without creating steam or spraying the product. The application should be made from bottom to top with horizontal movements. It is convenient and appropriate to proceed twice wet on wet. Use of a constant pressure electric pump is recommended.
Technical information Base: oligomers Active ingredient: 10% + 0.2 Weight / specific gravity at 20 ° C (DIN 51757) ± 1.05 g / ml pH 8 - 10 Appearance: milky white liquid Alkali resistance: excellent (pH up to 14) Wetting angle (ASTM D5946): > 60 ° Water vapor permeability: coefficient μ < 10 Maximum efficiency: after 7 days Efficiency after accelerated aging on bricks: 100% on natural stone: 97%
security
Consult the latest safety data sheet.
Note
Window frames and glass windows should be protected and spills should be cleaned up immediately with water.
The RC Impreg 400® product must not be applied to non-porous substrates such as marble, granite, glazed bricks, etc. The ideal working temperature is between 10 ° C and 30 ° C. In the presence of salt ‘efflorescence, these must be removed before applying RC-Impreg 400®.
Cleaning tools
Use water
Storage / Shelf life
The product must be stored frost-free at temperatures between 10 ° C and 30 ° C after the date of production in its original packaging closed.
Packaging
5 liter buckets
Legal notice The attached information and in particular the data recommendations for the application and end use of Rwanda Chemicals products have been provided as indicated in the technical notice. As in practice, substrates, specific conditions, etc. may vary different. use. Failure to comply with written advice does not imply any guarantee other than the legal guarantee against hidden defects. No guarantee can be applied in the event of non-conforming application. Rwanda Chemicals reserves the right to modify the properties of the product. The rights of third parties must be respected. All orders are accepted subject to our current conditions of sale. The user must imperatively consult the most recent version of the technical data sheet for the corresponding product. Download this data sheet here
Additional information
| Quantity | 20Kg, 5Kg |
|---|
Related products
-
RC MORTIER 100 PRO is based on an emulsion of styrene-butadiene polymers in water and is especially formulated for the stability and performance in cement mixes. The product act as adhesive and binder in mortars and slurries and achieves the best bond between old and new substrates. The elasticity and mechanical properties allow much better adhesion to the substrate. In concrete , the product reduces the water cement ratio for better performance and durability. In waterproofing properties, the latex improves the waterproofing and chemical resistance. The RC MORTIER 100 PRO is normally diluted with water depending on the expected performance (see scheme).
-
Cresyl was longtime known for its powerful disinfectant qualities and crésol based at that time. Formulations however evolved and today it is a powerful bactericide, fungicide, pesticide and weedkiller mainly used in agricultural environment for cleaning e.g. hen houses (poultry), hutches, breeding equipment and animal transport.
-
Description
RC Mortier 100® is a polymeric redispersable powder easy miscible with water and is compatible with all cement, plaster and lime in different proportions.
-
Description
RC Mortier 100® is a concentrated stable polymer liquid (emulsion) easy miscible with the mixing water and is compatible with all cement, plaster and lime in different proportions.
-
RC Impreg 400® is a ready made, high performing, colorless, waterbased waterrepellant for porous substrates (concrete, bricks, cementeous plastering, natural stone, roof tiles, …). The RC Impreg 400® is based on a mixture of different increasing molecular weight polymers offering an optimal and lasting waterrepellency effect. RC Impreg 400® is solventless, inflammable, odorless and can be applied to wet, dry or alkaline substrates- even fresh joints. This almost invisble after application product therefore respects the original aspect of the wall but shows a remarkable beading or lotus effect .
Quantity : 20Kg - 5Kg -
Highly effective ready to use cream emulsion on a silane/ polysiloxane base for masonry injection against rising damp
Highly Efficient Class A+ ACCORDING BBRI (Belgian Building resaearch institute)RC Inject 300® is a solvent free ready-to-use cream emulsion for masonry injection against rising damp.
RC Inject 300® is a high quality, very effective product, which is the result of years of research and experience.
RC Inject 300® damp-proofing cream has been formulated with a high concentration of active ingredient over 80% silane/siloxane.
When injected into masonry, RC Inject 300® cream reverts to a liquid phase it changes from the gel phase to a vapour phase resulting in complete absorption of the product providing superior penetration/flow and effective damp proof treatment.
Reviews
There are no reviews yet.