RC MORTIER 100 PRO is based on an emulsion of styrene-butadiene polymers in water and is especially formulated for the stability and performance in cement mixes. The product act as adhesive and binder in mortars and slurries and achieves the best bond between old and new substrates. The elasticity and mechanical properties allow much better adhesion to the substrate. In concrete , the product reduces the water cement ratio for better performance and durability. In waterproofing properties, the latex improves the waterproofing and chemical resistance. The RC MORTIER 100 PRO is normally diluted with water depending on the expected performance (see scheme).
RC Impreg 400® is a ready made, high performing, colorless, waterbased waterrepellant for porous substrates (concrete, bricks, cementeous plastering, natural stone, roof tiles, …). The RC Impreg 400® is based on a mixture of different increasing molecular weight polymers offering an optimal and lasting waterrepellency effect. RC Impreg 400® is solventless, inflammable, odorless and can be applied to wet, dry or alkaline substrates- even fresh joints. This almost invisble after application product therefore respects the original aspect of the wall but shows a remarkable beading or lotus effect .
Huwa-San is a disinfectant based on hydrogen peroxide.
Hydrogen peroxide (H2O2) is a transparent, colourless and odourless disinfectant liquid which is mixable in any ratio with water. After reaction, it decomposes into water (H2O) and oxygen (O2).
Cresyl was longtime known for its powerful disinfectant qualities and crésol based at that time. Formulations however evolved and today it is a powerful bactericide, fungicide, pesticide and weedkiller mainly used in agricultural environment for cleaning e.g. hen houses (poultry), hutches, breeding equipment and animal transport.
RC Impreg 400® is a ready-to-use, colorless and water-based water repellent for porous substrates
(concrete, bricks, cement plaster, natural stone, tiles, etc.).
The RC Impreg 400® is based on a blend of different polymers of increasing molecular weight offering
an optimal and lasting water-repellent effect.
RC Impreg 400® is solvent-free, flammable, odorless and can be applied to wet, dry or alkaline substrates,
even fresh joints.
Description
RC Mortier 100® is a polymeric redispersable powder easy miscible with water and is compatible with all cement, plaster and lime in different proportions.
Description
RC Mortier 100® is a concentrated stable polymer liquid (emulsion) easy miscible with the mixing water and is compatible with all cement, plaster and lime in different proportions.
Highly effective ready to use cream emulsion on a silane/ polysiloxane base for masonry injection against rising damp
Highly Efficient Class A+ ACCORDING BBRI (Belgian Building resaearch institute)
RC Inject 300® is a solvent free ready-to-use cream emulsion for masonry injection against rising damp.
RC Inject 300® is a high quality, very effective product, which is the result of years of research and experience.
RC Inject 300® damp-proofing cream has been formulated with a high concentration of active ingredient over 80% silane/siloxane.
When injected into masonry, RC Inject 300® cream reverts to a liquid phase it changes from the gel phase to a vapour phase resulting in complete absorption of the product providing superior penetration/flow and effective damp proof treatment.
| Property | ||||
| CR-510 | ||||
| Mass Fraction of TiO2％≥ | 90 | |||
| Color(In Conformity with Standard Sample)％≥ | 100 | |||
| Oil Absorption g/100g≤ | 21 | |||
| PH Value of Water Suspension | 6.5～8.5 | |||
| Mass Fraction of Volatile Substance at 105℃ ％≤ | 0.8 | |||
| Tint Reducing Power(Compared with Standard Sample )％≥ | 100 | |||
| Screen Floating On 325 Mesh Sieve ％≤
|
0.05 | |||
| Specific Resistance of Water Extract（Ω·m）≥ | 80 | |||
| Mass Fraction of Soluble Substance％≤ | 0.5 | |||
RC MORTIER 100 PRO is based on an emulsion of styrene-butadiene polymers in water and is especially formulated for the stability and performance in cement mixes. The product act as adhesive and binder in mortars and slurries and achieves the best bond between old and new substrates. The elasticity and mechanical properties allow much better adhesion to the substrate. In concrete , the product reduces the water cement ratio for better performance and durability. In waterproofing properties, the latex improves the waterproofing and chemical resistance. The RC MORTIER 100 PRO is normally diluted with water depending on the expected performance (see scheme).
RC Impreg 400® is a ready made, high performing, colorless, waterbased waterrepellant for porous substrates (concrete, bricks, cementeous plastering, natural stone, roof tiles, …). The RC Impreg 400® is based on a mixture of different increasing molecular weight polymers offering an optimal and lasting waterrepellency effect. RC Impreg 400® is solventless, inflammable, odorless and can be applied to wet, dry or alkaline substrates- even fresh joints. This almost invisble after application product therefore respects the original aspect of the wall but shows a remarkable beading or lotus effect .
Huwa-San is a disinfectant based on hydrogen peroxide.
Hydrogen peroxide (H2O2) is a transparent, colourless and odourless disinfectant liquid which is mixable in any ratio with water. After reaction, it decomposes into water (H2O) and oxygen (O2).
Cresyl was longtime known for its powerful disinfectant qualities and crésol based at that time. Formulations however evolved and today it is a powerful bactericide, fungicide, pesticide and weedkiller mainly used in agricultural environment for cleaning e.g. hen houses (poultry), hutches, breeding equipment and animal transport.
RC Impreg 400® is a ready-to-use, colorless and water-based water repellent for porous substrates
(concrete, bricks, cement plaster, natural stone, tiles, etc.).
The RC Impreg 400® is based on a blend of different polymers of increasing molecular weight offering
an optimal and lasting water-repellent effect.
RC Impreg 400® is solvent-free, flammable, odorless and can be applied to wet, dry or alkaline substrates,
even fresh joints.
Description
RC Mortier 100® is a polymeric redispersable powder easy miscible with water and is compatible with all cement, plaster and lime in different proportions.
Description
RC Mortier 100® is a concentrated stable polymer liquid (emulsion) easy miscible with the mixing water and is compatible with all cement, plaster and lime in different proportions.
Highly effective ready to use cream emulsion on a silane/ polysiloxane base for masonry injection against rising damp
Highly Efficient Class A+ ACCORDING BBRI (Belgian Building resaearch institute)
RC Inject 300® is a solvent free ready-to-use cream emulsion for masonry injection against rising damp.
RC Inject 300® is a high quality, very effective product, which is the result of years of research and experience.
RC Inject 300® damp-proofing cream has been formulated with a high concentration of active ingredient over 80% silane/siloxane.
When injected into masonry, RC Inject 300® cream reverts to a liquid phase it changes from the gel phase to a vapour phase resulting in complete absorption of the product providing superior penetration/flow and effective damp proof treatment.
| Property | ||||
| CR-510 | ||||
| Mass Fraction of TiO2％≥ | 90 | |||
| Color(In Conformity with Standard Sample)％≥ | 100 | |||
| Oil Absorption g/100g≤ | 21 | |||
| PH Value of Water Suspension | 6.5～8.5 | |||
| Mass Fraction of Volatile Substance at 105℃ ％≤ | 0.8 | |||
| Tint Reducing Power(Compared with Standard Sample )％≥ | 100 | |||
| Screen Floating On 325 Mesh Sieve ％≤
|
0.05 | |||
| Specific Resistance of Water Extract（Ω·m）≥ | 80 | |||
| Mass Fraction of Soluble Substance％≤ | 0.5 | |||
RC Impreg 400® is a ready-to-use, colorless and water-based water repellent for porous substrates
(concrete, bricks, cement plaster, natural stone, tiles, etc.).
The RC Impreg 400® is based on a blend of different polymers of increasing molecular weight offering
an optimal and lasting water-repellent effect.
RC Impreg 400® is solvent-free, flammable, odorless and can be applied to wet, dry or alkaline substrates,
even fresh joints.
| Property | ||||
| CR-510 | ||||
| Mass Fraction of TiO2％≥ | 90 | |||
| Color(In Conformity with Standard Sample)％≥ | 100 | |||
| Oil Absorption g/100g≤ | 21 | |||
| PH Value of Water Suspension | 6.5～8.5 | |||
| Mass Fraction of Volatile Substance at 105℃ ％≤ | 0.8 | |||
| Tint Reducing Power(Compared with Standard Sample )％≥ | 100 | |||
| Screen Floating On 325 Mesh Sieve ％≤
|
0.05 | |||
| Specific Resistance of Water Extract（Ω·m）≥ | 80 | |||
| Mass Fraction of Soluble Substance％≤ | 0.5 | |||
Highly effective ready to use cream emulsion on a silane/ polysiloxane base for masonry injection against rising damp
Highly Efficient Class A+ ACCORDING BBRI (Belgian Building resaearch institute)
RC Inject 300® is a solvent free ready-to-use cream emulsion for masonry injection against rising damp.
RC Inject 300® is a high quality, very effective product, which is the result of years of research and experience.
RC Inject 300® damp-proofing cream has been formulated with a high concentration of active ingredient over 80% silane/siloxane.
When injected into masonry, RC Inject 300® cream reverts to a liquid phase it changes from the gel phase to a vapour phase resulting in complete absorption of the product providing superior penetration/flow and effective damp proof treatment.
Description
RC Mortier 100® is a concentrated stable polymer liquid (emulsion) easy miscible with the mixing water and is compatible with all cement, plaster and lime in different proportions.
Description
RC Mortier 100® is a polymeric redispersable powder easy miscible with water and is compatible with all cement, plaster and lime in different proportions.
Cresyl was longtime known for its powerful disinfectant qualities and crésol based at that time. Formulations however evolved and today it is a powerful bactericide, fungicide, pesticide and weedkiller mainly used in agricultural environment for cleaning e.g. hen houses (poultry), hutches, breeding equipment and animal transport.
RC MORTIER 100 PRO is based on an emulsion of styrene-butadiene polymers in water and is especially formulated for the stability and performance in cement mixes. The product act as adhesive and binder in mortars and slurries and achieves the best bond between old and new substrates. The elasticity and mechanical properties allow much better adhesion to the substrate. In concrete , the product reduces the water cement ratio for better performance and durability. In waterproofing properties, the latex improves the waterproofing and chemical resistance. The RC MORTIER 100 PRO is normally diluted with water depending on the expected performance (see scheme).
Huwa-San is a disinfectant based on hydrogen peroxide.
Hydrogen peroxide (H2O2) is a transparent, colourless and odourless disinfectant liquid which is mixable in any ratio with water. After reaction, it decomposes into water (H2O) and oxygen (O2).
RC Impreg 400® is a ready made, high performing, colorless, waterbased waterrepellant for porous substrates (concrete, bricks, cementeous plastering, natural stone, roof tiles, …). The RC Impreg 400® is based on a mixture of different increasing molecular weight polymers offering an optimal and lasting waterrepellency effect. RC Impreg 400® is solventless, inflammable, odorless and can be applied to wet, dry or alkaline substrates- even fresh joints. This almost invisble after application product therefore respects the original aspect of the wall but shows a remarkable beading or lotus effect .
| Property | ||||
| CR-510 | ||||
| Mass Fraction of TiO2％≥ | 90 | |||
| Color(In Conformity with Standard Sample)％≥ | 100 | |||
| Oil Absorption g/100g≤ | 21 | |||
| PH Value of Water Suspension | 6.5～8.5 | |||
| Mass Fraction of Volatile Substance at 105℃ ％≤ | 0.8 | |||
| Tint Reducing Power(Compared with Standard Sample )％≥ | 100 | |||
| Screen Floating On 325 Mesh Sieve ％≤
|
0.05 | |||
| Specific Resistance of Water Extract（Ω·m）≥ | 80 | |||
| Mass Fraction of Soluble Substance％≤ | 0.5 | |||
RC MORTIER 100 PRO is based on an emulsion of styrene-butadiene polymers in water and is especially formulated for the stability and performance in cement mixes. The product act as adhesive and binder in mortars and slurries and achieves the best bond between old and new substrates. The elasticity and mechanical properties allow much better adhesion to the substrate. In concrete , the product reduces the water cement ratio for better performance and durability. In waterproofing properties, the latex improves the waterproofing and chemical resistance. The RC MORTIER 100 PRO is normally diluted with water depending on the expected performance (see scheme).
Cresyl was longtime known for its powerful disinfectant qualities and crésol based at that time. Formulations however evolved and today it is a powerful bactericide, fungicide, pesticide and weedkiller mainly used in agricultural environment for cleaning e.g. hen houses (poultry), hutches, breeding equipment and animal transport.
Huwa-San is a disinfectant based on hydrogen peroxide.
Hydrogen peroxide (H2O2) is a transparent, colourless and odourless disinfectant liquid which is mixable in any ratio with water. After reaction, it decomposes into water (H2O) and oxygen (O2).
Description
RC Mortier 100® is a concentrated stable polymer liquid (emulsion) easy miscible with the mixing water and is compatible with all cement, plaster and lime in different proportions.
RC Impreg 400® is a ready made, high performing, colorless, waterbased waterrepellant for porous substrates (concrete, bricks, cementeous plastering, natural stone, roof tiles, …). The RC Impreg 400® is based on a mixture of different increasing molecular weight polymers offering an optimal and lasting waterrepellency effect. RC Impreg 400® is solventless, inflammable, odorless and can be applied to wet, dry or alkaline substrates- even fresh joints. This almost invisble after application product therefore respects the original aspect of the wall but shows a remarkable beading or lotus effect .
